Änisbrötli – Anis Bread Cookies- Swiss Christmas Cookies

Änisbrötli (or Springerle as they are called in  Germany, but since I am from Switzerland we’re going with the former 😉 ) are flavored with, as the name implies anis. Make sure you get cleaned anis seeds, not fennel seeds. Many times I see fennel (the vegetable) labeled as anis in the store, but no no, not the same.

These are the coolest to make, and have been my favorite on and off for many years. So I am just writing this because originally I wanted to say they are my favorite, but realized that I think I might have said that about at least one two other cookies as well, soooo… But truthfully, they are all my favorites 🙂

Please don’t think you can’t make these just because you don’t have one of the special pretty molds (called “Model” in German) I used here. You could of course, depending on what part of the country you live in, look for antique molds at yard sales or flea markets, or I think these lovely folks might ship overseas as well. But as you can see in the picture, they are fabulous also when made with regular cookie cutters, or turned into “Chräbeli” by forming dough pieces into a 3/4″ roll, cutting into 2″ pieces and cutting 2-3 times into each piece diagonally. Then bend them a little and proceed just like for all the other shapes.

One thing that is super important, you have, have, HAVE to make these on a greased cookie sheet. No parchment paper, no silicone mat, greased cookie sheet. Otherwise they will not rise properly when baked and won’t form the characteristic ‘foot’ as seen in the picture above.



  • 4 eggs
  • 3 cups confectioners sugar
  • 1 tbsp anis seeds
  • 1 pinch salt
  • 4 1/4 cups flour


  1. Beat eggs and confectioners sugar together until very bubbly/frothy (By hand this can take 10 minutes or more, if you are using a hand held mixer, make sure to stir in the confectioners sugar before turning on, or you’ll have the potential for a dust explosion on hand, not good for your kitchen or your respiratory system, trust me)
  2. Stir in Anis and salt
  3. Mix in the flour, and using your hands if necessary, form into a ball
  4. Let rest in the cold for 1 hour
  5. To form the cookies, roll out dough on a floured surface until about 1/2″ thick, dust surface with some flour and press the mold deeply into the surface, cut out using a cutter or knife and place on a prepared greased cookie sheet.**
  6. Allow cookies to dry overnight
  7. The next day, preheat your oven to 305°F (yep, very low threehundredandfive, no typo)
  8. Bake at 305°F for 11 – 13 minutes. Cookies are supposed to get light brown on the bottom

**If you happen to not have any of the pretty form used, no worry. You can still make them, either just use regular cookie cutters, or make “Chräbeli” by rolling the dough into a 1/2″ thick roll, and cut 3″ sections off, then using a sharp knife, make perpendicular slices being careful to not cut all the way. Bend slightly and place on the cookie sheet. You can see what a  “Chräbeli” looks like in the first picture, bottom right.


Pretty and yum!


Check out the post on more Swiss Christmas Cookies to try other varieties

Copyright © 2011 Simple Healthy Homemade. All rights reserved

6 Replies to “Änisbrötli”

  1. I think you should include in the recipe that they need to be cover when left to dry out over night. I made these yesterday, am baking them right now and they have a skin on the top from not covering them.

    1. Hi Sara!

      Thanks for your comment!
      They are supposed to dry on the top, I guess you could say ‘form a skin’. That is necessary for them to rise from the bottom and form the traditional ‘foot’. If they are not dried first, they puff up everywhere and the design on top gets ruined, this way the top stays flat and any intricate details of the design (if you are using a model) stays intact!
      I hope you enjoy the cookies!

  2. My dad was a pastry chef and from Zurich. We had a bakery in the Washington DC area and I remember every year he would make Änisbrötli. He called them Springerle. I’ll never forget those. I’m still looking for a really good Springerle stamping plate. Thanks for the memories!

Comments are closed.